|
| | FAAC Model 860
Slide Gate Operator
FAAC is the undisputed world leader in automated gate
opener systems for opening gates, doors and garage doors.
In 1965 FAAC introduced hydraulics in the automatic gate openers sector and,
through the years, has perfected this technology and adapted it to a
multiplicity of needs.
In the 1980s, FAAC began producing its own electronic equipment, including
access control devices, radio controls, safety and signaling systems. They
were the first to use microprocessors in control units, SMT technology, as well
as simplified self-learning radio controls for electric gate openers.
| |
The Model 860 CD is shown here with chain (left) and rack &
pinion (right) configurations. The chain configuration also shows
the slide gate installation kit. |
FAAC MODEL
860
Designed for high pulling force requirements in high traffic applications.
Available in chain and rack&pinion versions. Model 860 has 2
year limited warranty
MODEL 860 CHAIN KITS INCLUDE: Operator Control panel (826
MPS) Sprocket Idlers and protective cover Leveling hardware Chain-to-gate
mounting hardware with nickel plated master links
MODEL 860 RACK & PINION KITS INCLUDE: Operator
Control panel (826 MPS) Pinion Leveling hardware
FEATURES: Continuous duty operation 230 VAC Internal limit
switches Manual release (non-keyed standard) "Soft Stop" on
opening and closing 3/4 hp motor Selectable delayed opening and closing
(to allow light activation) Microprocessor Control: Choose from 8
operating models:
a) 2 kinds of garage-door-like logic (signal to open,
signal to close)
b) 2 kinds of automatic logic (signal to open, then close
after a selectable time period
c) 2 kinds of security logic (for
anti-tailgating)
d) 2 kinds of logic for an attended gate Model 860 Slide Gate Operator
- Continuous duty operation
- Internal limit switches
- Soft Stop on opening (except partial opening) and closing
- 3/4 hp motor
- Manual release (non-keyed standard)
- Selectable delayed opening and closing (to allow for warning light
activation)
- 230 VAC
FAAC 860
Brochure Download
installation manual
Microprocessor Control for 860
- Choose from 8 operating modes:
2 kinds of garage-door-like logic (signal to open, signal to close)
- 2 kinds of automatic logic (signal to open, then close after a
selectable time period)
- 2 kinds of security logic (for anti-tailgating)
- 2 kinds of logic for an attended gate
-
| Choice for 860: with or without installation kit |
|
Installation Kits with pedestal for
CHAIN DRIVEN operators 3501* and 35S1*
- 30 nickel plated chain (Kit 35S1* has stainless
steel chain)
- Mounting pedestal
- 8 x 10 X 5.5 NEMA 4 fiberglass enclosure
with backplate and power switch
- Hardware set for enclosure to pedestal attachment
- 2 sets of conduit and connectors for connecting
enclosure to operator
- 2 caution signs
|
|
|
|
Installation Kits with pedestal for
RACK&PINION operators 3503*
- 23 gear rack
- Mounting pedestal
- 8 x 10 X 5.5 NEMA 4 fiberglass enclosure
with backplate and power switch
- Hardware set for enclosure to pedestal attachment
- 2 sets of conduit and connectors for connecting
enclosure to operator
- 2 caution signs
|
|
|
|
FAAC MODEL 860
SLIDE GATE OPERATOR KITS
|
| MODEL |
PART
NUMBER
|
TYPE |
PULLING
FORCE |
MAX
GATE
LENGTH |
PARTIAL
OPENING |
SPEED |
PRICE |
860
Z16(16 tooth sprocket)
(with Installation Kit 3501) |
860C2CO-01-16 |
CHAIN
(nickel plated
chain included) |
85 lbs |
33 ft |
5 ft |
40 ft/min |
$1599.00 |
860
Z16(16 tooth sprocket)
(with Installation Kit 35S1) |
860C2CO-S1-16 |
CHAIN
(stainless steel
chain included) |
85
lbs. |
33
ft |
5
ft |
40
ft/min |
$1885.00 |
860
Z20(20 tooth sprocket)
(with Installation Kit 3501) |
860C2CO-01-20 |
CHAIN
(nickel plated
chain included) |
65 lbs |
42 ft |
6 ft |
50 ft/min |
$1599.00 |
860
Z20(20 tooth sprocket)
(with Installation Kit 35S1) |
860C2CO-S1-20 |
CHAIN
(stainless steel
chain included) |
65
lbs. |
42
ft |
6
ft |
50
ft/min |
$1885.00 |
860
Z16(16 tooth sprocket)
(without Inst. Kit or chain) |
860C2CO-NP-16 |
CHAIN
(not included) |
85 lbs |
33 ft |
5 ft |
40 ft/min |
$1439.00 |
860
Z20(20 tooth sprocket)
(without Inst. Kit or chain) |
860C2CO-NP-20 |
CHAIN
(not included) |
85
lbs. |
33
ft |
6
ft |
50
ft/min |
$1439.00 |
860
Z16(16 tooth pinion)
(with Installation Kit 3503) |
860C2RO-03-16 |
RACK
& PINION (included) |
85 lbs |
33 ft |
5 ft |
40 ft/min |
$1359.00 |
860
Z20(20 tooth pinion)
(with Installation Kit 3503) |
860C2RO-03-20 |
RACK
& PINION (included) |
65
lbs |
42
ft |
6
ft |
50
ft/min |
$1359.00 |
860
Z16(16 tooth pinion)
(without Installation Kit) |
820C2RO-NK-16 |
RACK
& PINION (included) |
85 lbs |
33 ft |
5 ft |
40 ft/min |
$1439.00 |
860
Z20(20 tooth pinion)
(without Installation Kit) |
820C2RO-NK-20 |
RACK
& PINION (included) |
65
lbs |
42
ft |
6
ft |
50
ft/min |
$1439.00 |
| FAAC
MODEL 860 INSTALLATION KITS FOR CHAIN AND RACK & PINION OPERATORS-the installation kit you order depends on the following: does your
operator have a chain or a rack & pinion drive? If your operator has a
rack & pinion drive, do you want a pedestal or foundation plate? Refer
to the proper kit description below for you installation |
| PART NUMBER |
DESCRIPTION |
PRICE |
| FAAC3501 |
Slide Installation Kit
with Pedestal for chain operators include-
30ft nickel plated chain, mounting pedestal, NEMA4 fiberglass enclose with
backplate and power switch, hardware set for enclosure-to-pedestal
attachment, 2 sets of conduit and connectors for conducting enclosure to
operator, 2 caution signs |
$450.00 |
| FAAC35S1 |
Slide
Installation Kit with Pedestal for chain operators
include- same as above but with 30ft stainless steel chain |
$667.00 |
| FAAC3503 |
Slide Installation Kit
with Pedestal for rack & pinion operators
include- 23ft gear rack, mounting pedestal, NEMA4 fiberglass
enclosure-to-pedestal attachment, 2 sets of conduit and connectors for
connection enclosure to operator, 2 caution signs |
$650.00 |
| FAAC3505 |
Slide
Installation Kit with Foundation Kit for rack &
pinion operators include- 23ft gear rack, foundation
plate, NEMA4 fiberglass enclosure-to-pedestal attachment, 2 caution signs |
$510.00 |
|
FAAC STAND ALONE
ACCESSORIES 860 SLIDE OPERATORS
|
| PART NUMBER |
PART NUMBER |
YOUR PRICE |
| FAAC2000 |
Nickel Plated Chain -
#40 nickel plated chain, comes with two master links with each length of
chain you order |
$5.00/ft |
| FAAC2002 |
Stainless
Steel Plated Chain - you receive two master links with each
length of chain you order |
$15.00/ft |
| FAACCTG01 |
Chain-to-Gate Mounting
Hardware - the hardware needed to attach the two ends of nickel
plated chain to the gate. Includes 2 mounting brackets, 2 tension bolts
and 2 master links (all nickel plated) |
$37.00 |
| FAACCTGS1 |
Chain-to-Gate
Mounting Hardware - the hardware needed to attach the two ends of
stainless steel plated chain to the gate. Includes 2 mounting brackets, 2
tension bolts and 2 master links (all stainless steel plated) |
$42.00 |
| FAAC719323 |
Gear Rack - the
galvanized steel rack section measures 3.28ft long and works with any FAAC
slide gate operators. Supplied with rack-to-gate hardware |
$47.00 |
| FAAC2278 |
Foundation
Plate (for ground level mounting) - the plate measures 6 x 10.5
in. and has rebar anchors to be set in the concrete pad |
$44.00 |
| FAAC2411 |
Mounting
Pedestal (for elevated mounting) - 18 in. galvanized mounting
pedestal |
180.00 |
|
