swing gate operator
    swing gate opener      
Contractors Lic.  NV. #57900   CA #363787
Phone Hours (PST)
   since 1978
7:30 to 4:00 Mon.-Fri.
 Phone 775-588-1475 or Go to Our Main Store
gate opener Stop!! Click Here to see all our products at Main Store
Home 
electric gate openers
Swing Gate Openers
Slide Gate Operators
Barrier Gate Openers
gate operator
Upswung Manual
Barrier Gates
 
Elite
Residential Electric

Gate Openers
Commercial Electric
Gate Openers
automatic gates
Swing Gate Operators

Slide Gate Operators
Barrier Gate Operators
stanleysentex
Automatic Gate Opener Replacement Parts for HL410-11 to 440
FAAC
FAAC Swing

Gate Operators
FAAC Slide
Gate Operators
Doorking
DoorKing Access DKS
Doorking Gate Openers
Milleredge Safety
MillerEdge
electric gate openers
GiBiDi  HL series   Modo Gate Openers
EMX
Probe  Sensors 
Loop detectors
Access Controls

RF Controls
Proximity Card Readers
1500 Digital Keypads
1520 Stand Alone Card Readers
Magnetic Door Locks
Magnetic Gate Locks
Electric Locks - Strikes & Deadbolts

1838 Access Controller
Accessories
>>1200 Key Switch
>>1400 Lock Box
>>Interior Access
 
Download
 
 
prox card
   
   
card reader
Card reader mounted on an enclosure for outdoor applications.
   
access control
Indoor applications to control access to secure areas.
   
telephone entry
Key-fobs are small and fit on your key chain.
   
access control
Contactless proximity readers require no touch to read the card.
   
doorking
Long range readers can read tags up to 9-feet away

OPTIONS AVAILABLE WITH THIS MODEL
The DKS-10, AWID SR-2400 and the HID Thinline II readers are available with a surface mount enclosure to provide lighting and are suitable for mounting to a goose-neck post.
The above items may also be odered with a tracker expansion board installed in the enclosure.

 

We are a DKS Authorized Sales & Service Distributor.
Only buy from an authorized DKS Distributor for parts and warrantee repair.

DoorKing Proximity
Card Readers
doorking card reader
DoorKing carries a full line of DKS, AWID and HID proximity card readers and cards.   These readers output the card data to the access controller (1833, 1835, 1837 or 1838) where the decision to grant or deny access is made.   These readers are ideal for both pedestrian and vehicular access control.   Proximity cards transmit their information to the card reader without any physical contact.   This provides an easy to use vandal resistant system.   Access is granted when a valid card is presented to the card reader.

Dimensions of the various card readers available vary with the reader make and the read distance.   As a general rule of thumb, the longer the read distance, the larger the card reader.

Proximity Readers
Access Cards
   
Proximity Readers Access Cards
ADVANCED FEATURES
 
  • Because physical contact is not required,
    proximity cards can transmit their data
    through common building materials like:
    concrete, brick, stone, drywall, plaster, glass,
    wood, plastic...in fact, through anything but metal.
  • Proximity card readers are maintenance free.  
    There are no parts to wear out or adjust.
  • Passive card technology provides and unlimited
    number of "card reads" with no battery to wear out.  
    Active cards provide a much longer read range,
    but use a battery that will wear out in time
    (2-years approximately) and require replacement
    of the card.
  • Passive cards, unless they are physically abused,
    will last virtually forever.
SPECIFICATIONS
 
  • 26-bit weigand output.
  • Most readers operate on 5-12 VDC.
  • Proximity readers are not designed for
    stand-alone
    operation and must be connected to an
    access controller.
  • DKS Readers
  • DKS Tiny, DKS-10 and DKS-20; up to
    4" read range.
  • DKS-30; up to 12" read range.
  • DKS-70; up to 18" read range.
  • AWID Readers
  • SR-2400; up to 4" read range.
  • MM-6800, SP-6820; up to 8" read range.
  • Mr-1824; uo to 18" read range.
  • LR-911; up to 9-feet read range.
  • HID Readers
  • ProxPoint; up to 3"read range.
  • MiniProx; up to 5" read range.
  • ThinLine II; up to 5" read range.

Click On Above Link to Main Store for Current Information and Prices.

 
PROXIMITY CARD READERS

 PROXIMITY CARD READERS, CARDS AND TAGS

PART # DESCRIPTION
DK1815-280 Sentinel-Prox SR-2400 - mullion mounted, 4-5 inch read range. Metal compensated.
DK1815-281 Sentinel-Prox SP-6820 - designed for gang box mounting, 6 - 8 inch read range. Low profile, switch  plate design.
DK1815-290 SP-6820 With Surface Enclosure - suitable for mounting on a goose neck mounting
DK1815-291 SP-6820 With Surface Enclosure And Tracker Board - same as the 1815-290, but also includes Tracker expansion
board installed in the enclosure
DK1815-282 Sentinel-Prox MM-6800 - Mullion mounted, 6-8 inch read range. Metal compensated.
DK1815-283 Sentinel-Prox MR-1824 - long range reader, 18-24 inch  read range. Measures only 8" x 8" x 1". Includes 1812-038
12 VDC. Regulated, 800 ma power transformer.
DK1815-284 Sentinel-Prox MR-1824MC - same as 1815-083 with  metal compensation for mounting directly to a steel post. Includes 1812-083 12 VDC. regulated, 800 ma power transformer
DK8069-082 PROXmtr™ ONE Button Transmitter
with AWID Proximity Tag
DK8070-082 Proxmtr™ TWO Button Transmitter
with AWID Proximity Tag
DK8071-082 Proxmtr™ THREE Button Transmitter
with AWID Proximity Tag
DK1508-020 Prox-Linc CS - standard proximity cards for use with AWID readers only. (must order minimum of 50)
DK1508-021 Prox-Linc GR - ISO compliant graphics quality proximity cards for use with AWID readers only. (must order minimum of 50)
DK1508-022 Prox-Linc KT - proximity key tags for use with AWID readers only. Use of the keytags in place of cards will decrease the range of the reader. (must order min. of 50)
 

PROXIMITY CARD READERS, CARDS AND TAGS

PART # DESCRIPTION
DK1815-380 Proxpoint Plus - 3 inch read range, Metal Compensated. 5.1 - 16 VDC
DK1815-381 Miniprox - 5 inch read range. Metal compensated. 5.1 - 16 VDC. Charcoal gray color.
DK1815-382 Thinline II - designed for single-gang electrical box mounting, 5 inch read range. Low profile, switch plate design. 5 -16 VDC
DK1815-390 Thinline II with Surface Mount Enclosure - ThinLine II mounted on a lighted enclosure. Suitable for mounting on a goose neck mounting post
DK1815-391 Thinline II with Surface Mount Enclosure and Tracked Board - same as the 1815-390, but also includes Tracker™ expansion board installed in the enclosure
DK1815-383 Proxpro Plus - 11 inch read range. Measures only 7.5" x 7.5" x 1". Includes 1812-038 12 VDC, regulated, 800 ma power transformer. Charcoal gray only.
DK1815-384 Maxipro - 29 inch read range. Mount on non-metal surface for best performance. Includes 1812-038 12 VDC, regulated, 800 ma power transformer. Charcoal
gray only.
DK8069-084 Proxmtr™ ONE Button Transmitter
with HID Proximity Tag
DK8070-084 Proxmtr™ TWO Button Transmitter
with HID Proximity Tag
DK8071-084 Proxmtr™ THREE Button Transmitter
with HID Proximity Tag
DK1508-018 Proxcard II - standard proximity card for use with HID readers only (must buy minimum 50)
DK1508-017 Isoprox II - ISO compliant quality proximity cards for use with HID readers only (must buy minimum 50)
DK1508-016 Proxkey II - proximity key tags for use with HID readers only. Use of the keytag in place of cards will decrease the range of the reader

TOUCH PLATE CARD READERS AND CARDS

PART # DESCRIPTION
DK1815-067 Touch Plate Reader Surface Mount - suitable for goose neck mounting post. Use 1508-040 cards only with this reader.
DK1815-267 Touch Plate Reader Flush Mount - reader mounted in flush enclosure Use 1508-040 cards only with this reader.
DK1815-069 Touch Plate Reader With Tracker Board Surface Mount -  same as 1815-069, but also includes Tracker expansion board installed in the enclosure
DK1815-269 Touch Plate Reader With tracker Board Flush Mount - same as the 1815-069, but also includes Tracker expansion board installed in the enclosure. use 1508-040 cards only with this reader.
DK1508-040 Touch Plate Cards - use with 1815-067, 1815-267, 1815-069 readers only. (must buy minimum 50)
 
Gate operator installations should be completed by a qualified installer only. Electric Gate Openers  assumes no liability if product is installed incorrectly. Please see owners / installation instructions for complete details.
For Sales Information
mail@swing-gate-products.com


swing gate opener

  Copyright © 2009